Hofmann Pro42 Скачать руководство пользователя страница 46

Страница: 46 / 66

Page 3-46

Chapter III Operation

Adjust Menu

One of the most powerful features of the Aligner Series

is the assistance given to the alignment technician when

performing adjustments on a vehicle. These features

are on the Adjust menu, and are accessed through the

Adjust icon, located on all Readings Screens.

Caster, Camber and Toe Adjust on Turnplates -

This

feature allows “live” adjustment of front suspension

components.

Caster, Camber and Toe Adjust Elevated -

This feature

allows “live” adjustment of front suspension components

while in the raised position.

Rear Camber and Toe Adjust Elevated -

This feature

allows “live” adjustment of rear suspension components

while in the raised position.

EZ Toe

– This software routine is a method of setting

front toe while steered from straight ahead, making it

easier to adjust and obtain straight steering wheels.

Shims and Kits

– Many front wheel drive cars use a

shim on the rear axle/spindle to adjust camber and/or

toe. This program determines the proper shim to use.

A-Arm

Adjust

– for vehicles whose caster and camber adjustments are located

on the suspension A-Arm, this selection allows both angles to be corrected

simul-

taneously.

Wheel Off Caster, Camber, and Toe Adjust

- This feature allows the operator to

remove the wheel and attach the clamp/target assembly directly to a brake rotor

for easier access to adjustment of certain angles.

Wheel Off Rear Camber, and Toe Adjust

- This feature allows the operator to

remove the rear wheel and attach the clamp/pod assembly directly to a brake rotor

for easier access to adjustment of certain angles.

Offset Cam Bushing

- Many 2 and 4 -wheel drive trucks utilize offset sleeves

and inserts around the upper or lower ball joints to adjust the caster and camber

angles.

Cradle Adjust

– Assist with the adjustment of the engine cradle on many front

wheel drive cars.

Adjust Drag Link

– Assists with steer direction and straight steering wheel when

performing toe adjustments on trucks with a drag link adjustment.

Single Tie Rod Adjust

– helps with vehicles having a single tie rod toe ad-

juster.

Each of the Adjust Menu selections are described in the following pages.

Содержание Pro42



































































Результаты поиска

Содержание Pro42

Отзывы:

Похожие инструкции для Pro42

Бренды по названию

Популярные бренды

Hofmann Pro42, Руководство оператора

Результаты поиска

Содержание Pro42

Отзывы:

Похожие инструкции для Pro42

Бренды по названию

Популярные бренды