Hofmann Pro42 Скачать руководство пользователя страница 24

Страница: 24 / 66

Page 3-24

Chapter III Operation

View Specifi cations

This screen displays Year, Manufacturer, and Model

of the selected vehicle with Minimum, Preferred and

Maximum specifi cations for the front and rear wheels.

Dashes in any position indicate there are no manufac-

turer specifi cations for that wheel or angle. For angles

not displayed on this screen, refer to the specifi cation

book included in the literature package. The “Informa-

tion Systems” icon at the top of the screen contains

access to assistance available for adjusting that angle.

Clicking on the desired icon launches the adjustment

help features described on the next page. The Edit

Specs toolbar button (F8) allows editing of the displayed

specifi cations prior to beginning the measurements.

This is useful if a Technical Bulletin has been issued

that alters manufacturer’s specifi cations.

Editing Specifi cations

Use the pointer to click on the specifi cation edit icon

as shown to the left. Click on the number to be edited

(i.e. left camber). Once it is highlighted, enter the

desired value.

Use the pointer to move to any other values to be

changed. When all editing is complete, click on

NEXT.

Since these edited specs are now custom, enter in a

description of the new custom specifi cation which can

be recalled later.

Vehicle Stability Programming

If the vehicle selected features a Vehicle Stability As-

sistance programming (VSA), some adjustments may

be necessary after alignment which are required by the

manufacturer. The screen shown to the left appears

informing the operator that additional diagnostics or

calibrations may be required. In many cases an optional

scan tool is required to perform system resets or zero

adjustments to certain sensors.

Содержание Pro42



































































Результаты поиска

Содержание Pro42

Отзывы:

Похожие инструкции для Pro42

Бренды по названию

Популярные бренды

Hofmann Pro42, Руководство оператора

Результаты поиска

Содержание Pro42

Отзывы:

Похожие инструкции для Pro42

Бренды по названию

Популярные бренды