Hofmann Pro42 Скачать руководство пользователя страница 32

Страница: 32 / 66

Page 3-32

Chapter III Operation

Page 3-32

Chapter III Operation

Page 3-32

Chapter III Operation

Readings Screen

The

Readings

screen displays the primary vehicle

alignment information in an intuitive, three dimensional

format. The screen appears as a vehicle with the body

lifted off, viewed from the rear and above. Review the

fi gure above to become familiar with the screen layout

and functions.

Each wheel angle has a numeric reading as well as

a graphical meter display indicating directional ori-

entation and relationship to specifi cations. Camber

meters, located along the top of each tire, have a

line that indicates camber relative to the preferred

specifi cation. Toe meters, projected onto the ground

in front of each tire, have an arrow that indicates the

toe angle. Caster is represented by a meter in front of

each wheel. The numeric value for caster is directly

above the meter. When a meter is green, the reading

is within specifi cations. When the arrow is centered

within the green it is at the preferred value. A red meter

indicates the reading is out of specifi cation. The red

meter contains a green band, indicating the direction

of needed change. A gray meter indicates there is no

specifi cation for that angle.

All numeric readings on this screen are actual live

measurements, including caster. If any angles require

correction, make sure the brake pedal depressor is en-

gaged and the steering wheel is centered and locked,

then simply begin the adjustment. As the angles change

the display will update to refl ect the new readings. The

numeric values change and the meter indicators move

in the direction of change. Click on OK to proceed to

the next readings screen.

Turn Wheels Straight Ahead

The screen then changes to indicate the requirement

to turn the wheels to the straight ahead position. Cen-

tering the steering allows the geometric center-line to

be established for the rear readings which in turn will

determine the thrust angle or rolling direction. Thrust

Angle is the direction of the vehicle travel determined

by the total toe of the rear wheels. The thrust angle

is used as a reference when adjusting the front toe so

that a straight steering wheel is the end result. Toe

error on many rear wheel drive vehicles cannot be cor-

rected, creating a dog tracking effect and/or a crooked

steering wheel.

If the wheels are already straight ahead this screen

will briefl y appear and automatically proceed.

Содержание Pro42



































































Результаты поиска

Содержание Pro42

Отзывы:

Похожие инструкции для Pro42

Бренды по названию

Популярные бренды

Hofmann Pro42, Руководство оператора

Результаты поиска

Содержание Pro42

Отзывы:

Похожие инструкции для Pro42

Бренды по названию

Популярные бренды