HOFFEN VGS-7424, Инструкция по эксплуатации

Страница: 36 / 48

3
36
To disassemble the device, follow the assembly instructions above in reverse order.
7.3 Filling the water tank
1. Make sure the device is disconnected from the power source.
2. Remove the water tank by picking it up delicately by the water tank handle.
3. Flip the water tank upside down, unscrew the cap and fill the tank with water.
4. Screw the cap back on and replace the water tank inside the device.
CAUTION!
When the water in the water tank is used up, the device will not emit steam
anymore. Refill the water tank, observing all the protective measures. When
the water tank is empty, the device can overheat.
Never add any cleaning agents, fragrances, scented oils or other chemicals to
the water tank. Such agents may damage the device and make it dangerous
to use.
Only use distilled or boiled water.
Always disconnect the device from the power source before filling or emptying
the water tank.
Do not unscrew the cap when the device is in use.
The water filler cap must always be unscrewed slowly. Thus, any steam inside
the device which may be pressurised will be released gradually. Be careful, as
the steam may still be hot.
.
Hanger mounting
bracket
Steamer head
holder