HOESCH SteamBox 1800, Руководство по установке и обслуживанию

Страница: 28 / 128

28
GB
08.02.2 Clock
With „clock” submenu button you can set both time and 12- hour format. In order to set the time, choose the required
function with and buttons and then, set hour and minutes by using [-] and [+]button.
To select or cancel 12-hour format, use the and buttons then choose appropriate subsection and con fi rm with [ok]
button.
08.02.3 Aromatherapy control
Aromatherapy control submenu (impulse time, impulse duration, minimal temperature required) is chosen
with and buttons which are selected by pressing [OK] button. All settings can be adjusted with [-] and [+] button.
Impulse time can be regulated from 0 to 600 seconds, factory setting is 300 seconds. Impulse duration can be regulated
from 100 to 5000 ms, factory setting is 1000ms. Minimal temperature required can be regulated from 30°C to 50 °C,
factory setting is 30°C.
08.02.4 Exhaust air blower (optional)
There is a possibility to choose one of the three following functions, which are regulated with [-] and [+]button:
Function 1: Exhaust air fan can be switched on or off.
Function 2: Automatical turning on when “steam bath” function is active. Automatically turning off
10 minutes after turning off the “steam bath” function.
Function 3: Turning on when steam function is active and temperature in the steam cabin is 2°C lower
than selected temperature.
Factory setting: Function 1.
08.02.5 Anti-calc function
Choosing “anti-calc” subsection in service settings is achieved by using [menu] button. With button you choose
if you want to start anti-calc function or not and con fi rm it with [ok] button. Anti-calc function is performed after 20 hours
of steam generator work. When you use the steam function, the anti-calc function cannot be activated.
08.03 Steam function
You can choose and regulate temperature and steam bath time by using “steam bath” section in the menu.
You can select exact temperature and time by using the and button, and then adjust with [-] and [+] button.
Temperature in the steam cabin can be regulated from 25°C to 50°.
Steam bath time can be regulated from 0 to 90 minutes (in intervals of 5 minutes).
During the steam bath you can see in the display the current temperature in the steam cabin, the chosen temperature
and remaining steam bath time.
- warning! Hot surface!
08.04 Light
Light function is turned on/off with [OK] button in the main menu.
When you press slowly the [OK] button twice, you will choose the next color in the light settings (12V)
08.05 Aromatherapy
Aromatherapy function is turned on/off with [OK.] button in the main menu. You can regulate fragrance intensity from
10%-100% by using [-] and [+] button. This function is performed according to the parameters set in service settings.
Warning: Please, make sure the suction hose is in the fragrance tank! See the picture in page 19!
08.06 Exhaust air blower
Exhaust air blower function can be turned on /off with [OK.] button in the main menu if function 1 has been selected
in service settings.