Hochiki FirePro Xtinguish, Инструкция по установке и эксплуатации

Страница: 15 / 113

Page 15 of 113
FirePro Xtinguish I&O Manual V1.05 UL
6 FirePro Xtinguish Condensed Aerosol Fire Use and Limitations
6.1 Systems
The
FirePro Xtinguish
condensed aerosol systems shall be installed to protect hazards within the
limitations that have been established by this installation manual.
6.2 Use and Application
FirePro Xtinguish
condensed aerosol extinguishing systems are effective in extinguishing Class A, B, and
C fires.
FirePro Xtinguish
condensed aerosol extinguishing systems provide an efficient and effective means to
extinguish gas and liquid fires, burning solid substances, burning substances derived from hydrocarbons
(natural gas, oil products, flammable lubricants, etc.), as well as fires in electrical equipment with an
operating voltage not exceeding 75,000 Volts.
FirePro Xtinguish
condensed aerosol extinguishing systems shall not be used to protect areas, hazards
or spaces containing flammable liquids, vapors, or dusts that may form an explosive air/fuel mixture unless
they have been tested to the satisfaction of the authority having jurisdiction and/or proven by experimental
testing carried out by a third party laboratory.
FirePro Xtinguish
condensed aerosol extinguishing systems shall not be used on metal fires, on
substances generating self-sustaining combustion, and on the following substances unless they have been
tested to the satisfaction of the authority having jurisdiction and/or proven by experimental testing carried
out by a third party laboratory.

Deep seated fires in Class A materials

Class D fires:

D1 - light metals (aluminum - Al; magnesium - Mg Titanium ...)

D2 - alkali metals (potassium - K; natrium - Na; lithium - Li ...)

D3 - organic-metallic compounds (methyl magnesium chloride - CH3MgCl; methyl magnesium
iodide - CH3MgJ; triethyl aluminum - (C2H5)3Al...)

Metal hydrides (aluminum hydride - AlH3) lithium hydride - LiH ...)

Reactive metals such as, lithium, sodium, potassium, magnesium, titanium, zirconium, uranium, and
plutonium.

Chemical compounds containing oxidizers such as sodium chlorate or sodium nitrate.

Certain chemicals or mixtures of chemicals, such as cellulose nitrate and gunpowder, that are
capable of rapid oxidation in the absence of air

Chemicals capable of undergoing auto-thermal decomposition, such as certain organic peroxides
and hydrazine
The above list may be not exhaustive. Contact
Hochiki America Corporation
or your local
Hochiki
America
dealer if additional information is required.
The
FirePro Xtinguish
condensed aerosol generators shall not be employed at less than the minimum safe
distances specified in the present manual (see the aerosol generator datasheets for details).
The minimum safe distance between the
FirePro Xtinguish
condensed aerosol generator discharge ports
and personnel shall be based on an aerosol agent discharge temperature, at that distance, not exceeding
75°C (167° F). See Appendix C for generator datasheets and minimum safe distance information.
The minimum safe distance between the
FirePro Xtinguish
condensed aerosol generator discharge ports
and combustible materials shall be based on an aerosol agent discharge temperature, at that distance, not
exceeding 200°C (392° F). See Appendix C.