7
ASSEMBLING THE MAIN GEAR
❏
1. Degrease the plastic bushings and glue it into the
aluminium bearing blocks, using 5 min. epoxy glue.
❏
2. Put a little bit grease into the plastic bushings and put
the landing gear together, like you can see in the picture
above. Insert the M4x20 screws and fi x screws and the whole
landing gear with tape. Turn the fuselage around and fi x the
landing gear with 4 pcs of M4 safety nuts from the upper side.
Now you can install the suspension strut into hub and fuselage.
Use big shims on the outer side.
❏
3. Fix the suspension strut with shims and M4 internal
thread bolts together with the threaded rod. If the landing
gear is fi xed, lock on both sides with M4 lock nuts.
TAIL WHEEL ASSEMBLY
❏
1. Screw the plastic bearing block to the tail of the fuselage,
using 4 pcs of 2,8x16mm wood screws.
❏
2. Fix the wheel with two collars, put the long steering lever
onto the landing gear and insert it into the bearing block. Fix
the landing gear with collars like in picture. Use blue thread
lock for all screws.
ENGLISH
