USE AND MAINTENANCE
Page 1
7
8
. Solutions to the most common problems
I
Dishes not clean
P
ROBLEM
R
EMEDY
Wash arms stuck.
The arms should rotate easily by hand. Pull arms off and clean
carefully. Check and clean the arms supply pipe in the
machine.
Nozzles of spray arms obstructed
Remove the spray arms and clean carefully to remove
obstructions.
Nozzles of rinse arms clogged with limescale
Pull off the rinse arms and descale in a separate container.
Check that the water softener is operating correctly (if fitted).
Too much or too little detergent.
Check detergent dosage, referring to relative section in this
manual.
Filter clogged
Remove, empty and clean filter
Wash cycle too short.
Select a longer cycle if possible, or repeat the cycle.
II
Dishes not perfectly dry
P
ROBLEM
R
EMEDY
Too little rinse-aid
Increase dosage (see instructions).
Grease or starch not completely removed
Too little detergent. Increase dosage as per instructions in
relative section of this manual.
Wrong type of detergent
Choose a more effective product.
Washing solution too dirty.
Drain the wash chamber, clean filters and chamber. Remove
more residue prior to washing.
Rack unsuitable for type of tableware.
Use a suitable rack and allow water to drain from tableware.
Tableware left in machine after cycle has finished. Remove from machine immediately after the cycle finishes to
allow to dry.
Glassware surface rough and porous, or opaque
through corrosion.
Renew glasses and use suitable racks. Glasses should be
prevented from coming into contact with each other during the
wash cycle.
Streaks and spots on tableware.
Too much rinse-aid. Reduce the dosage (see instructions).
Water too hard or containing too high a
concentration of dissolved minerals.
Ask local water board for information about water quality and
compare with values indicated on the machine’s data plate