27
07 Group- supplementary Function parameters
Function
code
Name
Setting range
Minimum unit
Factory
setting
Change
07.00
Counting and timing
mode
LED bit: count arrival processing
0: One-cycle counting, stop output
1: One-cycle counting, continue to output
2: Cycle counting, stop output
3: Cycle counting, continue to output
LED ten bits: Reserved
LED hundred bits: timing arrival processing
0: One-cycle counting, stop output
1: One-cycle counting, continue to output
2: Cycle counting, stop output
3: Cycle counting, continue to output
LED thousand bits: reserved
000
～
303
103
×
07.01
The counter reset
value setting
Set the counter reset value
【
07.02
】～
9999
1
○
07.02
Setting of counter
detection value
Set the counter detection value
0
～【
07.01
】
1
○
07.03
Timing setting
Set the timing time
0
～
9999s
0s
○
07.04~07.07
Reserved
-
-
0
○
07.08
Swing frequency
control
0: prohibited 1: valid
0
～
1
0
×
07.09
Swing frequency
control
0: fixed swing
The reference value of swing is the maximum output frequency
(00.04).
1: variable swing
The reference value of the swing is the given channel frequency.
0
～
1
0
×
07.10
Swing frequency stop
starting mode
selection
0: start according to the state memorized before stop
1: restart starting
0
～
1
0
×
07.11
Swing frequency
amplitude
The swing frequency amplitude is a percentage of the maximum
output frequency (00.04).
0.0
～
100.0%
0.0%
○
07.12
Jump frequency
This function code refers to the amplitude of rapid decline after the
frequency reaches the upper limit frequency of the swing frequency,
and of course it also refers to the amplitude of rapid rise after the
frequency reaches the lower limit frequency of the swing frequency.
This value is a percentage relative to the swing frequency amplitude
(07.11). If it is set to 0.0%, there will be no sudden jump frequency.
0.0
～
50.0
％
0.0%
○
07.13
Swing frequency rise
time
Running time from the lower frequency of the swing frequency to the
upper frequency of the swing frequency.
0.1
～
3600.0s
5.0
○
07.14
Pendulum frequency
falling time
The running time from the upper swing frequency to the lower swing
frequency.
0.1
～
3600.0s
5.0
○
07.15
Frequency delay of
swing frequency upper
limit
Set the upper and lower frequency delays of pendulum frequency.
0.1
～
3600.0s
5.0
○
07.16
Frequency delay of
swing frequency lower
limit
0.1
～
3600.0s
5.0
○
Group 08-manage and display parameters
Function
code
Name
Setting range
Minimum unit
Factory
setting
Change
08.00
Main parameter
monitoring during
operation
For example: 08.00=2, that is, select the output voltage (D-02), then
the default display item on the main monitoring interface is the
current output voltage value.
0
～
30
0
○
08.01
Main parameter
monitoring during stop
For example: 08.01=3, that is, bus voltage (d-03) is selected, then
the default display item of the main monitoring interface is the
current bus voltage value.
0
～
30
1
○
08.02
Auxiliary parameter
display during
operation (only valid
for dual display
keypad)
For example: 08.02=4, that is, select the output Current (D-02), then
the default display item on the main monitoring interface is the
current output voltage value.
0
～
30
4
○
08.03
Auxiliary parameter
display during stop
(only valid for dual
display keypad)
For example: 08.03=3, that is, bus voltage (d-03) is selected, then
the default display item of the main monitoring interface is the
current bus voltage value.
0
～
30
3
○
