Intesis
TM
KNX
– HITACHI VRF
User Manual r1.2 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
18 / 32
Figure 4.8
Intesis MAPS Hitachi configuration tab for CSNET Manager configuration
In Units Configuration section you need to enter, for each unit:
•
Active
. If it’s active (checkbox at Unit xx), ranging from 1 to 64 indoor units that will be integrated (maximum
number of units will depend on Intesis model)
•
IU address
. Address 1
…64 of Unit in Hitachi H-Link bus.
•
OU address
. Address 1
…64 of Outdoor Unit in Hitachi H-Link bus.
•
CSNETid
. (only for CS-NET Manager configuration): in this column, the AC address inside the CSNET manager
must be configured by the integrator.
•
Description
. Descriptive name to easy identification of the unit (for example, ‘living room floor 1 unit’, etc).
Global Parameters:
In this section it is possible to select the temperature units for monitoring of the temperature signals available in the
gateways, Celsius (ºC) or Fahrenheit (ºF).
4.2.6 Signals
All available KNX objects, its corresponding description and other main parameters are listed in the signals tab.
