Intesis
TM
KNX
– HITACHI VRF
User Manual r1.2 EN
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
11 / 32
4
Set-up process and troubleshooting
Pre-requisites
It is necessary to have a KNX installation, device or interface operative and well connected to the corresponding KNX
port of Intesis. It is also required to have a Hitachi Air Conditioner installation, with accessible H-Link/TB2 port for
connection of Intesis.
Connectors, connection cables, PC to use the configuration tool and other auxiliary material, if needed, are not supplied
by HMS Industrial Networks S.L.U for this standard integration.
Items supplied by HMS Networks for this integration are:
•
Intesis gateway.
•
Link to download the configuration tool.
•
USB Console cable to communicate with Intesis.
•
Product documentation.
Intesis MAPS. Configuration & monitoring tool for Intesis KNX series
4.2.1 Introduction
Intesis MAPS is a Windows
®
compatible software developed specifically to monitor and configure Intesis new generation
gateways.
The installation procedure and main functions are explained in the
Intesis MAPS KNX User Manual
. This document can
be downloaded from the link indicated in the installation sheet supplied with the Intesis device or in the product website
at
In this section, only the specific case of Hitachi to KNX systems will be covered.
Please check the Intesis MAPS KNX User Manual for specific information about the different parameters and how to
configure them.
4.2.2 Connection
To configure the Intesis connection parameters press on the
Connection
button in the
menu bar
.
Figure 4.1
MAPS connection
