Intesis
TM
KNX
– Mitsubishi Heavy Industries AC
User’s Manual r1.2 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
16 / 26
Figure 4.3
KNX interface configuration
1.
Physical Address:
Enter the KNX physical address for the gateway.
2.
Force update after a KNX bus reset:
Affects to the KNX groups with the Update
feature activated (U).
3.
Delay for update after bus reset:
Enter the desired delay after a bus reset. It is
expressed in seconds.
•
IntesisIP interface configuration parameters:
Figure 4.4
IntesisIP interface configuration
1.
IP:
Enter the KNX physical address for the gateway.
2.
NetMask:
Enter the Intesis
TM
net mask address.
3.
Gateway:
Enter the router or
default gateway address if needed. In case you don’t
want to use it, left blank.
•
Mitsubishi Heavy Industries interface configuration parameters:
Figure 4.5
Mitsubishi Heavy Industries interface configuration
1.
Indoor Units:
In this list, you can individually enable each of the 128 indoor units
available on the system. T
he index in the column “Indoor U
nits
” (i.e. the number
1
2
3
1
3
2
6
8
7
5
4
1
3
2
9
