HMS Networks Anybus Communicator Скачать руководство пользователя страница 72

Страница: 72 / 126

Communicator Configuration

70 (124)

7.9.6

Connection Settings

When the EtherNet/IP Client (PLC) opens a connection to the Communicator, it specifies an I/O
data size.

By default the Communicator is set to

Accept Only Matching I/O Sizes

The connections must match the I/O size configured on the EtherNet/IP page, refer to

To Use

Automatic I/O Sizes, p. 67

and

To Configure I/O Sizes Manually, p. 67

You can change to

Accept All Connections

The Communicator will accept all connections with an I/O size that is equal to or smaller than
the configured I/O size in the Communicator.

7.10

I/O Data Map

On the

I/O data map

page the data communication between the subnetwork (Node) and the

high level network (PLC) is mapped.

The allocated I/O area is auto-generated based on how the settings on the

Serial communication

page and the

Nodes and transactions

page are configured.

It is possible to set the I/O area manually, if you want to pro-actively allocate more I/O for future
expansions without re-configuring the PLC. Refer to

To Configure I/O Sizes Manually, p. 67

There are three areas: Data from EtherNet/IP, Data to EtherNet/IP and General Areas. Refer to

Map Area, p. 73

Anybus

Communicator

™

User Manual

SCM-1202-152 1.10 en-US

Содержание Anybus Communicator































































































































Результаты поиска

Содержание Anybus Communicator

Отзывы:

HMS Networks Anybus Communicator, Руководство пользователя, Страница: 72 / 126

Результаты поиска

Содержание Anybus Communicator

Отзывы: