HMS Networks Anybus Communicator Скачать руководство пользователя страница 109

Страница: 109 / 126

Maintenance

107 (124)

11.1.2

Import Configuration

To easily configure multiple Communicators with the same settings, you can import a
configuration file.

Before You Begin

Importing a configuration replaces the current applied configuration.

Supported file format is

.conf

Procedure

Import configuration file:

On the Files & firmware page, click

Import

In the Import configuration window, click

Select file (.conf)

In the Open dialog box, browse to and select the configuration file and click

Open

In the Import configuration window, click

Import

In the Communicator address settings window:

–

To import

IP settings

from the selected configuration file, click

Imported settings

All configuration settings are imported.

–

To continue using the current

IP settings

, click

Configured settings

All configuration settings except the IP settings are imported.

The configuration file is parsed.

→

If the configuration is compatible, the settings are imported.

→

If any compatibility mismatches occurs, a message about the mismatch appears.

To apply the settings, click

Apply

in the web-interface header, and follow the instructions.

Anybus

Communicator

™

User Manual

SCM-1202-152 1.10 en-US

Содержание Anybus Communicator































































































































Результаты поиска

Содержание Anybus Communicator

Отзывы:

HMS Networks Anybus Communicator, Руководство пользователя, Страница: 109 / 126

Результаты поиска

Содержание Anybus Communicator

Отзывы: