HLC MHL 23, Руководство по эксплуатации

Страница: 8 / 64

8
Setup menu
Push the left and right arrow keys at the
same time , then the setup menu is displayed.
With
+
and
–
the values can be selected for
setting.
The selected box flashes, with
ok
it will be
permanently set for changing.
With the keys
+
and
– ,
the input or the values
can be changed. If an input is confirmed with
ok , the box will highlighted flashing again.
With confirming the button Start menu , the
start menu is displayed again.
The following values can be adapted:
Page 1:
Language: English, German, French, Spanish
Tempering unit: °C or °F
Block number (10-point calibration)
Confirm end:
Yes: at the process end, a signal is audible
until the ok key is pushed. Until then, the
process runs with the previous data.
No: the process ends without confirmation.