HLC MHL 23, Руководство по эксплуатации

Страница: 16 / 64

16
can be reduced. You have the possibility to determine a certain period (= rising
time; with a max. of 99 minutes to choose) in which a set temperature shall be
reached in the actual program step, if a slower than normal tempering is desired.
As shown in the illustration beside, a temperature of 60,0°C in step 2 shall be
reached within 20 minutes, starting from a temperature of 37,0°C in step 1. If no
changes are to be made in "rising time" (fastest possible heating or cooling time),
select the next field by using the
–
(down) button. For changing the standard value
0 press ok ; the ones column is highlighted and can be changed with buttons
+
and
–.
For changing the tens comlumn use button for marking and
+
and
–
for
changing. Confirm your entry by pressing ok and the next field "speed" will be blink-
ing.
Example of a temperature program:
Rotational speed = Shaking frequency with which the blocks are shaken.
The last number (1. digit) can not be selected and changed.
For "speed" 0 is set as standard. If no changes are to be made (tempering without
shaking), select the next field by using the
–
(down) button. To change this value
press ok ; every single digit can be changed. The cursor is placed at the hundreds
column of the set value. This value can be changed with buttons
+
and
–
. To change
another digit in this data field, it must be marked by buttons
<
and
>
. The highlight-
ed value will be changed with button
+
or
–
. The last digit (ones column) cannot be
chosen and changed. After setting the value it must be confirmed with
ok
; the
field "pause" is blinking.