Wireless remote controller YAP1F6
USM_CONTROL FLEXIA-K_208518_210401_ES
Note:
● To avoid the emission of cool air, after starting up the heating mode, the indoor unit will delay
1~5 minutes to blow air (actual delay time depends on the room temperature).
● Set temperature range from remote controller: 16~30
℃
(61-86°F);
Fan speed: auto, low speed, low-medium speed, medium speed, medium-high speed, high
speed.
Press this button to set the fan speed in the following sequence:
auto (AUTO), low ( ) , medium ( ), high (
).
Note:
●
In the AUTO speed mode, the unit will select the proper fan speed automatically according to the
ex-factory setting.
●
Low fan speed under Dry mode.
●
X-FAN function: Hold fan speed button for 2s in COOL or DRY mode, the icon
“
” is displayed and
the indoor fan will continue operation for a few minutes in order to dry the indoor unit even though
you have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not available
in the AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed
after the unit is
stopped to avoid mould.
o
Having set X-FAN function on: After turning the unit off, by pressing the
ON/OFF button, the indoor fan will continue running for a few minutes at low
speed. In this period, hold the fan speed button for 2s to stop the indoor fan
directly.
o
Having set X-FAN function Off: After turning the unit off, by pressing the ON/OFF
button, the complete unit will be off directly.
In the COOL or HEAT mode, press this button to turn to quick COOL or quick HEAT mode.
The "
" icon is displayed on the remote controller. Press this button again to exit the turbo
function and "
" icon will disappear.
When starting this function, the unit will run at super-high fan speed to cool or heat quickly so
that the room temperatures reaches the preset temperature as soon as possible.
●
Press the
"▲" or "
▼
" button once to increase or decrease the set temperature 1
℃
(°F). By holding
the
"▲" or "
▼
" button, 2s later, the set temperature on remote controller will change quickly. When
releasing the
button after setting is finished, the temperature indicator on indoor unit will change
accordingly
.
● When setting T-ON, T-OFF or CLOCK, press the "▲" or " " button to adjust the time.
(Refer to CLOCK, T-ON, T-OFF buttons) When setting T-ON, T-OFF or CLOCK press
"▲" or
" " button to adjust the time. (Refer to CLOCK, T-ON, T-OFF buttons).
Use that button to select the blowing angle either towards the left or the right. It is possible to select the air
blowing in the following sequence:
No display (it will stop in that
position)
Auto
4
TURBO button
▲/▼ button
5
6
3
FAN button
▲
▲
