Wireless remote controller YAP1F6
USM_CONTROL FLEXIA-K_208518_210401_ES
Under cooling mode, press "TEMP" and " CLOCK" buttons simultaneously to start up
or turn off energy-saving function. When energy-saving function is started up, "SE" will
be shown on remote controller, and air conditioner will adjust the set temperature
automatically according to ex-factory setting to reach to the best
energy-saving effect. Press "TEMP" and "CLOCK" buttons simultaneously again to
exit energy-saving function.
Note:
● Under energy-saving function, fan speed is defaulted at auto speed and it can’t be
adjusted.
● Under energy-saving function, set temperature can’t be adjusted. Press "TURBO"
button and the remote controller won’t send signal.
● Sleep function and energy-saving function can’t operate at the same time. If energy-
saving function has been set under cooling mode, press sleep button will cancel
energy-saving function. If sleep function has been set under cooling mode, start up the
energy-saving function will cancel sleep function.
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start up
or turn off 8
℃
heating function. When this function is started up, "
" and "8
℃
" will be
shown on remote controller, and the air conditioner keep the heating status at 8
℃
.
Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8
℃
heating
function.
Note:
● Under 8
℃
heating function, fan speed is defaulted at auto speed and it can’t be
adjusted.
● Under 8
℃
heating function, set
temperature can’t be adjusted. Press "TURBO" button
and the remote controller won’t send signal.
● Sleep function and 8
℃
heating function can’t operate at the same time. If 8
℃
heating function has been set under cooling mode, press sleep button will cancel 8
℃
heating function. If sleep function has been set under cooling mode, start up the 8
℃
heating function will cancel sleep function.
● Under
℉
temperature display, the remote controller will display 46
℉
heating.
Press "▲" and " " simultaneously to turn on or turn off the child lock function. When
the
child lock function is on, the " " icon appears on the remote controller. If you
operate the remote controller, the " " icon will blink three times without sending
signal to the unit.
Under OFF status, press the " "and the MODE buttons simultaneously to switch the
temperature display between
℃
and
℉
.
Energy-saving function
Temperature display switchover function
▲
▲
8
℃
heating function
Child lock function
