HITEC D2414 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 81

HITEC D2414 Скачать руководство пользователя страница 31

Hitec Luxembourg S.A. |

5, Rue de l’Église, L-1458 Luxembourg

www.hitec.lu | [email protected] | Tel.: (+352) 49 84 78 - 1 | Fax. (+352) 401303

File Name: HTCA_003-DADS-UserManual.docx
Document Type: End User Manual | Version date: 01/05/2010 | Last Printed: 15/02/2011

Page 31/81

The

Print

button allows printing out the graph results, including graph and configuration

settings. This button has the same function then the menu File / Print Setup.

Configuration Section

The Configuration section provides some information about the actual configuration of the
test system terminal during the test. In case the application is in the retrieve modus the latest
configuration of the test is shown. This
is due to the fact that the settings can
change during a test, by using a non
standard sequence. The following
information is provided.

TLS

The actual TLS during the test. See also Definitions and Terms for more
information about the TLS.

Chamber

The chamber with which the test is made.

Burette

The speed of the burette (ml/min).

Liquid

Displays the liquid used for the absorption test.

Motor speed

The motor speed (rpm).

Sampling rate

The sampling rate of the terminal (samples/10 ms).

Graph Section

This part of the main
window displays the

torque

vs. the quantity

graph, of

the test made, or the actual
value of, in case the test is
running.

The

scale

of the torque can

be changed, by pressing on
the

arrow buttons.

The blue curve indicates
the raw torque curve. The
green one shows the
calculated polynomial
curve. And the yellow line
indicated the current TLS
value.

By "

double-clicking

" on

the graph window the graph
X scale sets itself to make
the complete graph visible.

«
...
29
30
31
32
33
...
»

Содержание D2414


















































































Отзывы:

Нет отзывов