Hitec Luxembourg S.A. |
5, Rue de l’Église, L-1458 Luxembourg
www.hitec.lu | [email protected] | Tel.: (+352) 49 84 78 - 1 | Fax. (+352) 401303
File Name: HTCA_003-DADS-UserManual.docx
Document Type: End User Manual | Version date: 01/05/2010 | Last Printed: 15/02/2011
Page 26/81
The command
Setup
allows to configure the individual parameters for each tester.
The following window appears (i.e. for the Dads application).
Figure 4
– DADS Configuration window
The
Machine type
should be chosen and a name should be given to the machine.
Name
The name of the DADS terminal. This name will also been shown on
the application buttons in the DADS application. For example you can
insert the serial number of the equipment if you have more than one.
Machine type
Type of the Absorption base unit, which can be:
Type B:
Brabender base unit, with no data acquisition system.
Type E:
Brabender base unit, providing basic ASTM absorption
test features.
Type H:
HITEC base unit, providing extended ASTM absorption
test features. (Max Torque = 15Nm)
Type H-20:
HITEC base unit, providing extended ASTM
absorption test features. (Max Torque = 20Nm)
Refer to the user manual of the HITEC Config application in
to get the
meaning of the different items. Just choose the default ones the first time you install.
