Hitachi ZW 310-6 Скачать руководство пользователя страница 504

Страница: 504 / 506

Hitachi Construction Machinery Europe N.V. (HCME) Limited Warranty

IF THIS WARRANTY IS ALSO TRANSLATED INTO ANOTHER

LANGUAGE, DIFFERENT FROM ENGLISH, IN CASE OF

DISCREPANCIES BETWEEN THE TEXTS, THE TEXT IN ENGLISH

LANGUAGE SHALL PREVAIL.
THIS WARRANTY SHALL BE GOVERNED BY AND IS CONSTRUED

IN ACCORDANCE WITH THE LAW OF THE NETHERLANDS WITH

THE EXCLUSION OF THE UN CONVENTION ON CONTRACTS

FOR THE INTERNATIONAL SALE OF GOODS (CISG). ALL CLAIMS

AND DISPUTES ARISING OUT OF OR IN CONNECTION WITH

THIS WARRANTY SHALL BE SETTLED BY THE COMPETENT

COURT IN AMSTERDAM, THE NETHERLANDS. HOWEVER, HCME

SHALL HAVE THE RIGHT TO SUBMIT ANY CLAIM OR DISPUTE TO

A COURT THAT WOULD HAVE JURISDICTION IN THE ABSENCE

OF THE FOREGOING STIPULATION. AS AN EXCEPTION, IF

THE USER IS DOMICILED OUTSIDE THE EUROPEAN UNION,

SWITZERLAND, NORWAY OR ICELAND, UPON COMMENCEMENT

OF PROCEEDINGS ALL CLAIMS AND DISPUTES ARISING OUT

OF OR IN CONNECTION WITH THIS WARRANTY, SHALL BE

FINALLY SETTLED IN ACCORDANCE WITH THE ARBITRATION

RULES OF THE NETHERLANDS ARBITRATION INSTITUTE (NAI).

THE ARBITRAL TRIBUNAL SHALL BE COMPOSED OF THREE

ARBITRATORS WHO SHALL DECIDE IN ACCORDANCE WITH THE

RULES OF DUTCH LAW. THE PLACE OF ARBITRATION SHALL BE

AMSTERDAM, THE NETHERLANDS. THE ARBITRAL PROCEDURE

SHALL BE CONDUCTED IN THE ENGLISH LANGUAGE.
Claims under this Warranty should be submitted to a place

of business of an authorized HCME’s Distributor or directly

to HCME. For the information concerning either the address

to submit the claims or HCME as the issuer of this Warranty,

please write to: Hitachi Construction Machinery (Europe) N.V.,

Sicilieweg 5, 1045 AT, Amsterdam, The Netherlands.

This version is in effect as of October 1, 2014.

Содержание ZW 310-6



























































































































































































































































































































































































































































































































Результаты поиска

Содержание ZW 310-6

Отзывы:

Похожие инструкции для ZW 310-6

Бренды по названию

Популярные бренды

Hitachi ZW 310-6, Руководство оператора

Результаты поиска

Содержание ZW 310-6

Отзывы:

Похожие инструкции для ZW 310-6

Бренды по названию

Популярные бренды