Hitachi ZW 310-6 Скачать руководство пользователя страница 301

Страница: 301 / 506

OPERATING MACHINE

5-21

Dozing

IMPORTANT:



Never attempt to forcibly push piled material higher

than the bucket capacity. Premature wear of the tires

due to slipping and/or waste of fuel may result.



Do not perform dozing with the bucket dumped.

Abnormal excessive stress will be applied on the

front attachment.



Never apply great traction force to the cutting edge

with the cutting edge tilted forward more than 10°.

Failure to obey so may result in damage such as

cracks to the working tools and front attachment.

Dozing stands for a working method performed by a wheel

loader using the wheel loader bucket in place of a bulldozer

blade. This operation method is employed when reclaiming

land or dumping material into a hopper.

Set the bucket bottom parallel with the ground surface and

drive the wheel loader forward.

Scooping

WARNING: Do not allow the machine to engage in

piling up material on a soft ground. It is import to be

aware that steering operation on soft ground may

easily cause tipping over of the machine.

Take care not to touch the ground with the counterweight

while engaging in scooping work.

The machine may become unstable, possibly causing the

machine to turnover.

M4GB-05-017

M4GB-05-018

Содержание ZW 310-6



























































































































































































































































































































































































































































































































Результаты поиска

Содержание ZW 310-6

Отзывы:

Похожие инструкции для ZW 310-6

Бренды по названию

Популярные бренды

Hitachi ZW 310-6, Руководство оператора

Результаты поиска

Содержание ZW 310-6

Отзывы:

Похожие инструкции для ZW 310-6

Бренды по названию

Популярные бренды