Hitachi ZW 310-6 Скачать руководство пользователя страница 253

Страница: 253 / 506

OPERATING ENGINE

3-7

Starting in Cold Weather

Preheating

1. Turn the key switch (1) ON. The ambient temperature

sensor is activated so that the engine is automatically

preheated.

2. Preheat indicator (2) comes ON. As long as the preheat

indicator stays ON, the engine is being heated.

NOTE: Preheating time varies depending on the ambient

temperature.

3. As soon as preheat indicator (2) goes OFF, turn key

switch (1) to START position to rotate the starter. As

soon as the engine starts, release the key switch. The key

switch will automatically return to the ON position.

Do not depress accelerator pedal (3) when starting the

engine.

After the engine starts, perform idling operation

without depressing accelerator pedal (3) to warm up the

machine.

After starting the engine, perform warm-up operation as

described on page 3-11.

IMPORTANT: Right after the engine starts, the engine

speed will be kept to slow idle speed for maximum 30

seconds even if accelerator pedal (3) is operated.

WARNING: After starting the engine, start the

machine operation only after confirming that the

engine speed changes by operating accelerator pedal

(3).

Otherwise, the machine or the front attachment may

unexpectedly start moving, possibly causing accidents

such as crash.

NOTE: Illuminations such as headlight, work light or room

light may become dim during the engine preheat operation at

cold temperature.

MNEC-01-073

MNEC-01-036

MNDB-01-053

Содержание ZW 310-6



























































































































































































































































































































































































































































































































Результаты поиска

Содержание ZW 310-6

Отзывы:

Похожие инструкции для ZW 310-6

Бренды по названию

Популярные бренды

Hitachi ZW 310-6, Руководство оператора

Результаты поиска

Содержание ZW 310-6

Отзывы:

Похожие инструкции для ZW 310-6

Бренды по названию

Популярные бренды