Hitachi ZW 310-6, Руководство оператора

Страница: 247 / 506

3-1
OPERATING ENGINE
Inspect Machine Daily Before Starting
Perform the required daily check before starting the engine.

Refer to "Maintenance" section for detailed information.
Check Points Check Contents
1. Brake System 1. The brake pedal stroke is appropriate, brake performance is sufficient,
and the brakes apply evenly.
2. The parking brake performance is sufficient.
2. Tires 1. Tire pressure is appropriate.
2. No cracks and damage observed.
3. No excessive wear observed.
4. No metal pieces, stones or other foreign material found.
3. Wheel Disk Mounting condition of the wheel disk is correct.
4. Lights and Turn Signals They light up or flash normally without contamination and damage.
5. Outside Rear View Mirror and Inside
Rear View Mirror
Appropriate visibility obtained.
6. Reflectors and Registration Plate No contamination and damage found.
7. The portions where abnormality was
found at previous operation.
No abnormality observed.
8. Engine 1. Level and contamination of engine oil and coolant.
2. Loose or damage of the alternator drive belt.
3. Ease of starting, exhaust gas color, and noise.
4. Oil and water leaks, damage to hoses and pipe lines.
5. Clogging and damage of radiator, oil cooler and inter cooler.
6. Looseness and/or missing mounting bolts and nuts.
7. Check crankcase breather tube.
8. Drain water and sediment from fuel filter.
9. Check exhaust gas color and noise.
10. Check dust ejection valve.
11. Check accelerator pedal operation.