Hitachi ZW 310-6 Скачать руководство пользователя страница 323

Страница: 323 / 506

MAINTENANCE

7-9

WARNING: Never attempt to maintain the machine

when the engine is running in order to prevent an

accident. If the engine must be run while working, do

the following.



One person should take the operator's seat

to be ready to stop the engine any time while

communicating with other workers.



When working around moving parts is unavoidable,

pay special attention to ensure that hands, feet, and

clothing do not become entangled.



If parts or tools are dropped or inserted into the fan

or the belt, they may fly off or be cut off. Do not drop

or insert parts and tools into the moving parts.



Move control lever lock switch (2) to lock ( ) position

so that the front attachment will not move.



Never touch the control levers and pedals. If

operating the control levers or pedals is unavoidable,

signal co-workers to move to a safe place.

SA-2294

SA-026

Содержание ZW 310-6



























































































































































































































































































































































































































































































































Результаты поиска

Содержание ZW 310-6

Отзывы:

Похожие инструкции для ZW 310-6

Бренды по названию

Популярные бренды

Hitachi ZW 310-6, Руководство оператора

Результаты поиска

Содержание ZW 310-6

Отзывы:

Похожие инструкции для ZW 310-6

Бренды по названию

Популярные бренды