manualshive.com logo in svg

Hitachi ZAXIS 120-3 class, Руководство оператора

Поделиться
Скачать
Hitachi ZAXIS 120-3 class Скачать руководство пользователя страница 266

MAINTENANCE

7-75

5

  Remove Travel Levers

The travel levers may be removed if desired.

1.  Park the machine on a level surface.
2.  Lower the bucket to the ground.
3.  Turn the auto-idle switch off.
4.  Turn the key switch OFF. Remove the key from the key 

switch.

5.  Pull the pilot control shut-off lever to the LOCK position.
6.  Remove bolts (1) and (2) to remove levers (3) and (4) 

from brackets.

 NOTE:  Wrench size                              17 mm 

Tightening torque                50 N•m (5 kgf•m, 37 lbf•ft)

6

  Check and Replace Seat Belt 

 

Check --- daily 

 

Replace --- every 3 years

Always maintain seat belt (5) in a functional condition and 

replace when necessary to ensure proper performance. 

 

Prior to operating the machine, thoroughly examine belt (5), 

buckle (6) and attaching hardware (7) and tether belt (8). If 

any item is damaged or materially worn, replace seat belt (5) 

or component before operating the machine. 

 

We recommend that seat belt (5) be replaced every three 

years regardless of its apparent condition.

3

M178-07-077

4

2

1

6

7

8

5

M1U1-07-008

M1U1-07-009

5

6

7

8

Содержание ZAXIS 120-3 class














































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды