manualshive.com logo in svg

Hitachi ZAXIS 120-3 class, Руководство оператора

Поделиться
Скачать
Hitachi ZAXIS 120-3 class Скачать руководство пользователя страница 13

SAFETY

S-2

FOLLOW SAFETY INSTRUCTIONS

•

  Carefully read and follow all safety signs on the machine 

and all safety messages in this manual.

•

  Safety signs should be installed, maintained and replaced 

when necessary.

•  If a safety sign or this manual is damaged or missing, 

order a replacement from your authorized dealer in the 

same way you order other replacement parts (be sure to 

state machine model and serial number when ordering).

•

  Learn how to operate the machine and its controls correctly 

and safely.

•

  Allow only trained, qualified, authorized personnel to oper-

ate the machine.

•

  Keep your machine in proper working condition.

•  Unauthorized modifications of the machine may impair 

its function and/or safety and affect machine life.

•  Do not modify any machine parts without authorization. 

Failure to do so may deteriorate the part safety, func-

tion, and/or service life. In addition, personal accident, 

machine trouble, and/or damage to material caused by 

unauthorized modifications will void Hitachi Warranty 

Policy.  

•  Do not use attachments and/or optional parts or equip-

ment not authorized by Hitachi. Failure to do so may 

deteriorate the safety, function, and/or service life of the 

machine. In addition, personal accident, machine trouble, 

and/or damage to material caused by using unauthorized 

attachments and/or optional parts or equipment will void 

Hitachi Warranty Policy.  

•

  The safety messages in this SAFETY chapter are intended to 

illustrate basic safety procedures of machines. However it is 

impossible for these safety messages to cover every hazard-

ous situation you may encounter. If you have any questions, 

you should first consult your supervisor and/or your autho-

rized dealer before operating or performing maintenance 

work on the machine.

003-E01B-0003

SA-003

Содержание ZAXIS 120-3 class














































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды