Hitachi UX2 Series, Инструкция по эксплуатации

Страница: 186 / 300

Chapter 7. Auxiliary Functions
7-30
7.4. Back Up Data to USB Memory
This section describes how to backup data to the USB memory.
7.4.1. Copying data at once
[NOTE] The backup data is due for 14 days. If it exceeds that, it cannot be used.
(1) Functions
● Backs up messages and user patterns to USB memory.
● Backed up data can be copied to the IJ printer.
● You can select the following data types when copying data to the IJ printer.
Selectable data types when copying data
Data type Description
Print data
●
Includes the settings of print description, print format, and print
specifications.
●
Saved messages are to be backed up, but the current message is not.
●
To back up the current message, save and back it up as a saved
message.
Standard pattern
●
Includes the standard patterns of all dot matrix sizes.
User pattern
●
Includes the saved characters of all dot matrix sizes.
● Data of multiple IJ printers can be backed up to one USB memory.
● A file put and named with the manufacturing number and the date of back up with the extension “hijp” is
created in USB memory.
<e.g.> U212345678_20210826_1351.00.hijp
● When copying backed up data from USB memory to an IJ printer, select the copy destination folder.
● One USB memory can store data of up to 100 IJ printers. However, it must not exceed the USB memory
capacity.
● Use the [Setting] menu to remove and insert USB memory.
● Do not repeatedly remove and insert USB memory.
● When copying standard pattern data, start the [Copy data] function while the unit is stopped.
● Use USB memory with interface 3.0/2.0/1.1 and FAT16 or FAT32 file system.
● When performing [Copy IJP
→
USB] or [Copy data USB
→
IJP], if [USB Memory Error]
occurs or the USB memory cannot be recognized, verify the USB format (FAT16 or FAT32)
on a PC.
● Please periodically back up messages and user patterns.
Manufacturing number Date Time
00 (basically)