1.3.6
1 - 11
Fig. 1-18 Main Unit Connector
(3) Check the axis portion of the coupling shaft on the bottom of the
sample compartment. The coupling shaft has an incision (a
cut-in).
External view of the sample
compartment
Coupling shaft
Fig. 1-19 External View of Incision on Coupling Shaft
Lead out cables sliding through the wiring
hole with the tenon-like convex shape
portion on the main unit connector being
in a state “downside being
”. If the
length of cable lead out is short, plugging
connector into Auto Sipper connector
becomes difficult; therefore, lead out
cables with an enough length referring to
the length shown in Fig. 1-18.
Wiring hole
Incision on
coupling shaft
