Hitachi KP-FD30, Руководство по эксплуатации

Страница: 4 / 17

The KP-FD30 is a single CCD type RGB color camera which
utilized the progressive scan CCD image sensor with square
pixel for VGA format of 1 / 2-inch which adopted the RGB
primary color mosaic filter.
●
Analog RGB output ( 60 frame/second )
● Small,Compact,Self-contained
● High picture quality (Digital signal processing LSI .(DSP))
● CCD drive functions (Preset electronic shutter,Variable
electric shutter, Auto electronic shutter,
frame / field on demand.)
● Auto level control (AVERAGE,AREA,PEAKE/AVE)
● White balance(Auto,Preset,Manual)
●
Auto iris lens (galvanometer type)
●
Picture adjustment
(Modes and settings can be selected and adjusted from.)
● NTSC ( VBS,Y/C,RGB ) output
It can be set as the image output of
NTSC system by
Switch change.
Features
General
● Camera(with C mount adaptor)
●
Operation manual
Optional accessories
● DC input plug ( R03-P3F
)
R03-P3F
●
Lens plug ( E4-191J-100 ) E4-191J-100
●
MULTI cable plug KEC-15P(Housing)
JK-SP2140(Pin cntact)
JK-C151C(Cover)
Composition
①
C-mount adaptor
（ When using a CS-mount lens,remove the C-mount adaptor. ）
② Lens mount ring
③ Lens mount screws
④ Set up buttons [ SET/UP/DOWN ]
⑤ Video output connector [ VIDEO OUT]
⑥ DC input connector [ DC IN ]
⑦
MULTI connector [ MULTI ]( Inch size screws)
⑧
Lens connector [ LENS ]
Iris control voltage input (galvanometer) type lens
⑨
Camera rear switch
Set the switch according to the type of video signal.
SW-1 ON (Upper side):VGA ( progressive scan ) mode*
OFF (Lower side):NTSC (2:1 interlace scan ) mode
1 2 3 4 *Factory setting is
VGA(progressive) mode.
SW:ON
OFF
Note : Please turn OFF SW-2 and 3 and 4. (They are not used.)
⑨
⑧
⑦
⑥ ⑤
④
③
①
②
Section names and functions