Hitachi KP-FD30, Руководство по эксплуатации

Страница: 13 / 17

Internal switch setting
HD/VD External Timing chart
To access the internal switches, remove the four screws on
the back panel of the camera. Carefully remove the pack
panel. There are two internal switches that may need to be
changed depending on the use and connection of the camera.
(1)SW6001
HD/SYNC, VD input-and-output change.
Upper side: output* *Factory setting is
Lower side: input HD/SYNC, VD outpout.
(2)SW6002
75-ohm termination change.
Upper side: 75 ohm termination* *Factory setting is
Lower side: No termination 75ohm termination.
2)NTSC mode
External HD
External VD
Sync output
External HD
External VD
Sync output
Even field
Odd field
Even field
Odd field
Screws
Cautions:
Before removal of the back panel, make sure that power is
shut off to the camera.
Please remove the back panel carefully; there is a FPC
cable that is connected between the back panel and the
internal boards.
If the back panel is forcefully removed, there is a
possibility of damaging the cable and connector.
Screws
SW6001
HD/VD inputs
1)VGA mode
External HD
External VD
Sync output
SW6002