Hitachi KP-FD30, Руководство по эксплуатации

Страница: 12 / 17

6）
White balance setting menu
［
WHITE BALANCE MENU
］
White balance mode is set up.Please set up according to the
operating environment of the camera.
press the Set button to return to the White balance menu.
●
White balance detection area setting
Shift the cursor to Area Select and press the Set button to
display the White balance detection area select menu.
There are 9 White balance detect areas selected by the
Up and Down buttons. After deciding the detection areas,
B Gain offset fine adjustment
(*)
[ -128 ～ 000 ～ +127 ]
(*) Press the Set button;
the numerals flash. Press the
Up and Down buttons to
change the R/B Gain offset.
Select White balance mode
[ MANUAL / ATW / AWC ]
AWC preset start(A push on a
set switch restarts AWC.)
R Gain offset fine adjustment
(*)
[ -128 ～ 000 ～ +127 ]
ＲＥＴ
ＥＮＤ
●● ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＭＥＮＵ ●●
Z ＭＯＤＥ ：ＭＡＮＵＡＬ
Ｒ－ＧＡＩＮ ： ０００
Ｂ－ＧＡＩＮ ： ０００
Return (Return to the main menu)
End (Return to the normal screen)
(*) Press the Set button;
the numerals flash. Press the Up
and Down buttons to change the
R/B Gain.
Select White balance mode
[ MANUAL / ATW / AWC ]
R Gain adjustment
(*)
[ -128 ～ 000 ～ +127 ]
B Gain adjustment
(*)
[ -128 ～ 000 ～ +127 ]
MODE: MANUAL
Z ＭＯＤＥ ：ＡＴＷ
ＷＢ ＡＲＥＡ ：ＯＮ（ＮＯ．１）
ＡＲＥＡ ＳＥＬＥＣＴ
ＲＥＴ
ＥＮＤ
●● ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＭＥＮＵ ●●
Select White balance mode
[ MANUAL / ATW / AWC ]
White balance detection area select
mode
[ OFF / ON ]
Go to the white balance detection
area select
Return (Return to the main menu)
End (Return to the normal screen)
MODE: ATW
┃ ┃
┗━━━━━━┛
ＡＲＥＡ（ＷＢ）
ＮＯ．１
┏━━━━━━┓
┃ ┃
White balance detection area
Detect area positions
６ 5 4
2 1 3
7
8 9
Ｂ－ＧＡＩＮ ＯＦＦＳＥＴ： ０００
ＲＥＴ
ＥＮＤ
●● ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＭＥＮＵ ●●
Z ＭＯＤＥ ：ＡＷＣ
ＰＲＥＳＥＴ ＳＴＡＲＴ ：ＰＵＳＨ ＳＥＴ
Ｒ－ＧＡＩＮ ＯＦＦＳＥＴ： ０００
MODE:AWC
●● ＳＵＢ ＭＥＮＵ ●●
Z ＩＴＥＭ ：ＰＲＥＳＥＴ
ＳＹＮＣ ＭＯＤＥ ： ＨＤ／ＶＤ
Ｈ ＰＨＡＳＥ ： ０００
Camera initialize(Press the Up and Down
buttons simultaneously for 2 seconds to
return the initial setting.)
(*) Press the Set button;
the numerals flash. Press the Up
and Down buttons to change the
H phase.
ＯＵＴＰＵＴ ：Ｒ，Ｇ，Ｂ
ＳＹＮＣ／ＨＤ ＯＵＴ ：ＳＹＮＣ
ＳＹＮＣ ＯＮ Ｇ ：ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ：ＭＡＮＵＡＬ
ＣＡＭＥＲＡ ＲＥＳＥＴ：ＰＵＳＨ ＳＥＴ
Adjustment item selection
[ PICTURE / PRESET ]
Synchronized mode
[ INT. / HD/VD ]
H Phase adjustment (*)
[ -128
～
000
～
+127 ]
Video output setup
[ R,G,B / Y/C,VBS ]
Synchronized signal output setup
[ SYNC / HD ]
Sync on Green
[ OFF / ON ]
Lens type
[ MANUAL / AUTO ]
ITEM: PRESET
ＥＮＤ
ＲＥＴ
7）
Sub menu
［
SUB MENU
］
Changing the picture quality (video response) of the camera
output image. Please set up according to the operating
environment of the camera.
Press the Set button simultaneously for 2 seconds to
return the initial setting.
An underline portion is the setup at the time of factory
shipments.
● Camera reset:
●● ＳＵＢ ＭＥＮＵ ●●
Z
ＩＴＥＭ ：ＰＩＣＴＵＲＥ
ＣＨＲＯＭＡ ＧＡＩＮ ： ０００
ＳＨＡＲＰＮＥＳＳ ： ０００
ＰＥＤＥＳＴＡＬ ： ０００
ＧＡＭＭＡ ：ＯＮ
ＰＯＬＡＲＩＴＹ ：ＰＯＳＩＴＩＶＥ
ＲＥＴ
ＥＮＤ
the numerals flash. Press the Up
and Down buttons to change the
Color / Detail / Pedestal level.
ITEM: PICTURE
[ PICTURE / PRESET ]
Color level setting (*)
[ -128 ～ ～ +127 ] 000
Detail level setting (*)
[ -128 ～ 000 ～ +127 ]
Pedestal level setting (*)
[ -128 ～ 000 ～ +127 ]
Gamma on/off
[ ON ( γ =0.45)/ OFF( γ =1.0) ]
Negative/positive
[ POSITIVE / NEGATIVE ]
Return (Return to the main menu)
End (Return to the normal screen)
(*) Press the Set button;
Adjustment item selection