Hitachi KP-FD30, Руководство по эксплуатации

Страница: 10 / 17

Note:
If the ratio of (PEAK) is enlarged, a picture level may
flicker. In this case (PEAK) should reduce a ratio.
MODE: PEAK/AVE
Select ALC mode
[ AVE, AREA, PEAK/AVE ]
Peak level / Average level
[0/100, 15/85, 30/70,
50/50, 75/25, 100/0 ]
Video level adjustment
(*)
[ -128 ～ 000 ～ +127 ]
Return(Return to the main menu)
End(Return to the normal screen)
(*) Press the Set button;
the numerals flash. Press the Up
and Down buttons to change the
video level.
●● ＡＬＣ ＭＥＮＵ ●●
Z ＭＯＤＥ ：ＰＥＡＫ／ＡＶＥ
ＰＫ／ＡＶ ： ０／１００
ＬＥＶＥＬ ： ０００
ＲＥＴ
ＥＮＤ
9 8
7
3 1 2
4 5 6
Detect area positions
Detect area indication
ＡＲＥＡ（ＡＬＣ）
ＮＯ．１
┏━━━━━━┓
┃ ┃
┃ ┃
┗━━━━━━┛
●
Detection area setting
Shift the cursor to Area Select and press the Set button to
display the detection area select menu.
There are 9 light
detect areas selected by the Up and Down buttons.
Select the areas from nos. 1 to 9 that include the subject
of main interest. After deciding the detection areas, press
the Set button to return to the ALC menu.
MODE: AREA
Select ALC mode
[ AVE, AREA, PEAK/AVE ]
Go to the area select menu
Video level(light volume)adjust
(*)
[ -128 ～ 000 ～ +127 ]
Return(Return to the main menu)
End(Return to the normal screen)
(*) Press the Set button;
the numerals flash. Press the Up
and Down buttons to change the
video level.
●● ＡＬＣ ＭＥＮＵ ●●
Z ＭＯＤＥ ：ＡＲＥＡ
ＡＲＥＡ ＳＥＬＥＣＴ：ＮＯ．１
ＬＥＶＥＬ ： ０００
ＲＥＴ
ＥＮＤ
ALC MODE: AVE
Select ALC mode
[ AVE, AREA, PEAK/AVE ]
Video level(light volume)adjust
(*)
［-128～000～+127］
Return(Return to the main menu)
End(Return to the normal screen)
(*) Press the Set button;
the numerals flash. Press the Up
and Down buttons to change the
video level.
●● ＡＬＣ ＭＥＮＵ ●●
Z ＭＯＤＥ ：ＡＶＥ
ＬＥＶＥＬ ： ０００
ＲＥＴ
ＥＮＤ
（ 3 ） Auto level control ［ ALC MENU ］
Automatic light control mode is set up. This control is reflected
during automatic level control operation of an automatic iris
diaphragm lens, AGC, AES, etc.
There are the following three modes in automatic exposure
control.
①
[AVE]
Responds to the average lighting over a broad area.
②
[AREA]
Exposure is controlled only by the luminosity level of
specific area. (Scanning area is selectable from 9 area.)
③
[PEAK/AVE]
The peak level and the average level are used together
and exposure is controlled.
(The ratio of a peak value and average value is changeable.)
Camera title position setting
ＣＡＭＥＲＡ ＮＯ．１
● Title positioning setting [ POSITION ]
Press the Up and Down buttons to shift the characters
horizontally. Afterwards, press Set to confirm the display
position and return to the main menu.
MODE: TOP/( or BOTTOM)
●● ＣＡＭＥＲＡ ＴＩＴＬＥ ＭＥＮＵ ●●
Z ＭＯＤＥ ：ＴＯＰ
０１２３４５６７８９
ＡＢＣＤＥＦＧＨＩＪＫＬＭ
ＮＯＰＱＲＳＴＵＶＷＸＹＺ
！？＃＆（ ） ， ．：；～＊％
＋－×／＝” ’
ＳＰＡＣＥ ← → ＲＥＳＥＴ
ＰＯＳＩＴＩＯＮ ＲＥＴ ＥＮＤ
□□□□□□□□□□□□□□□□□□□□□□□
Display on/off and position
[ OFF, TOP, BOTTOM ]
Input character select table
Blank
,
cursorshift(left,right)
,
character
delete
Display position (left,right),
Return, end
Input charactet display
(24 alphanumeric characters)
MODE: OFF
Display on/off and position
[ OFF, TOP, BOTTOM ]
Return (Return to the main menu)
End (Return to the normal screen)
●● ＣＡＭＥＲＡ ＴＩＴＬＥ ＭＥＮＵ ●●
Z
ＭＯＤＥ ：ＯＦＦ
ＲＥＴ
ＥＮＤ