Hitachi HF-BT1000, Руководство пользователя

Страница: 8 / 129

S-5
SAFETY INSTRUCTIONS (Continued)
2. SAFETY WARNINGS IN THIS MANUAL
2.1 Safety Warning Indicated as “ NOTICE ”
z
When a failure of a drive is anticipated, back up the data immediately and
replace the drive. For information about how to replace a drive, see
“
HF-BT1000 INSTRUCTION MANUAL (manual number BT-62-0002)”.
(See page 2-2.)
z
When an OS hung-up occurs, the processes on the OS may not run as
scheduled, and the processing of the equipment may be delayed. As a result,
the facility that uses this equipment may be affected. You must resolve the
root cause of the OS hung-up as soon as possible.
(See page 2-4.)
z
If this equipment continues to operate while fan failure is detected, internal
parts such as a processor are not cooled down sufficiently, and that may
cause thermal runaway of the system due to malfunction of the equipment or
result in damage to the parts.
(See page 3-3.)
z
If you select “ Retriggered by application program ” under Watchdog
timer setting and “ Not reset ” for Action at timeout in the RAS Setup
window, set the status display digital LEDs to the application status display
mode so that the status code is not displayed there. Otherwise, the timeout
code may be overwritten by the status code and may not be able to be
checked.
(See page 3-6.) (See page 4-17.)
z
When the Hardware status window shows an error in hardware, resolve the
error immediately.
(See page 4-3.)
z
When failure of a drive is anticipated by SMART, the drive may experience
hardware failure in near future. We recommend you to back up the data and
replace the drive.
(See page 4-9.)