6 - 16
6-2-5 Starting and Terminating Adjustment Program
Make sure that the connections are correct, the power switch on DVD video camera/recorder is set to
“Movie”, and the DC power supply for DSP-R jig is turned on. The adjustment program will not start
unless the connections for adjustment are correct, and the DVD video camera/recorder or DSP-R jig
is powered.
Information:
1) Display ×××× on subsequent PC screen shows the model name.
2) The numbers on PC screens show the operational procedure.
(1) Start
1) Start the PC. If the PC has already started, terminate all
other applications.
2) Start Explorer, and double-click the “MAP2006W.EXE”
fi le in map06w folder to start the adjustment program.
3) Once the adjustment program has started, the
COMMUNICATION PORT SETTING screen will appear.
4) Check the communication port to which the RS-232C
cable is connected, and then choose the radio button
of corresponding port on COMMUNICATION PORT
SETTING screen.
5) Click the OK button on the COMMUNICATION PORT
SETTING screen, and then proceed with the MODEL
SELECT screen.
Note:
If the dialogs on right appear, perform the following
troubleshooting:
When the power or connection error dialog appears:
A connection is incorrect or power is not turned on.
Make sure that all connections are correct and that
power is supplied to the reference data creating
device or DSP-R interface jig.
Clicking the OK button will fi nish the program:
After solving the problem, restart the program.
When the communication port error dialog appears:
There was a mistake in selecting communication port.
Check the communication port.
Clicking the OK button will fi nish the program:
Select the communication port again after restart.
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION
MANUAL ADJUSTMENT PROGRAM
for SERVICE STATION
COM PORT SETTING
PORT 1
PORT
PORT 6
PORT 5
PORT 4
PORT 3
PORT 2
OK
EXIT
Copyright (C) HITACHI, Ltd 2003
4
5
COMMUNICATION PORT SETTING
screen
POWER OR CONNECTION ERROR
dialog
OK
COM PORT ERROR
ERROR
!
COM PORT ERROR dialog
OK
MAY OCCURE ON CABLE OR JIG OR CAMCORDER.
POWER FAILURE OR CONNECTION ERROR!
ERROR
!
Adjustment > Setups for Adjustment
