![background image](http://html.mh-extra.com/html/hitachi/dynamic-link-manager/dynamic-link-manager_user-manual_145987211.webp)
3. Creating an HDLM Environment
187
Change the underlined text as follows:
Before:
label=linux-sd
After:
label=linux-HDLM
25. Delete the
root
specification contained in the boot loader configuration file.
Delete the
root
specification in the configuration that you copied in step 23. If
you are using a Xen kernel, delete the root device specification in
module
. For
details on Xen kernels, see
Table 3-47: Xen Hypervisor Operating Environments
Supported by HDLM
.
26. Specify the initial RAM disk image file created in step 19 for
initrd
contained
in the boot loader configuration file.
Change the
initrd
specification in the configuration that you copied in step 23.
If you are using a Xen kernel, change the
initrd
file name specified in
module
to the initial RAM disk image file you created in step 19. For details on Xen
kernels, see
Table 3-47: Xen Hypervisor Operating Environments Supported by
HDLM
.
Keep in mind that the specification method for
initrd
differs depending on the
boot loader.
If any options have been specified to suit the user environment, take care not to
delete those options.
27. If SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise Server 11 is
used, delete the
resume
setting contained in the boot loader configuration file.
Delete the
resume
specification contained in the configuration that you copied in
step 23. If
resume
is set for the
kernel
parameter, delete the
resume
setting,
because it is not supported by HDLM.
28. In the boot loader configuration file, edit the settings to be used during a boot.
•
When GRUB is the boot loader
Change the
default
number so that a boot can be performed using the
configuration copied in step 23.
default=3
•
When LILO or ELILO is used as the boot loader:
Specify
label
for
default
.
default linux-HDLM
Содержание Dynamic Link Manager
