Hitachi Dynamic Link Manager Скачать руководство пользователя

Страница: 356 / 746

4. HDLM Operation

332

fsck

, the operation may not finish. In such a case, perform the operation again

after restoring the path error.

The name of the HDLM device file will not be displayed on the Hardware

Browser of Red Hat Enterprise Linux.

The Linux functionality that adds

LABEL=

to a SCSI device is not supported in

HDLM. Do not use this functionality. With HDLM, access can constantly be

made to the same LU if the name of the HDLM device file is the same.

If all the following conditions are satisfied, even a path in the normal status might

become Offline(E) or Online(E):

•

A storage system that has a SATA drive is being used.

•

There is a heavy I/O load on the storage system.

•

Path health checking is set to ON.

If this problem happens, reduce the I/O load, and then return the path status to

Online by performing an online operation.

Although the following messages are output when you load the alert driver and

the filter driver respectively, HDLM operations are not affected.

sddlmadrv: unsupported module, tainting kernel.
sddlmadrv: module license 'Proprietary: Contact Hitachi for
any bugs' taints kernel.

If you start the host when using an HDLM device as a boot disk, the error message

KAPL05023-E might be output to the syslog file. However, HDLM operations

are not affected.

dlmmgr: KAPL05023-E Could not process the IOCTL(0000125F).
(00000000:00000000)

4.1.2 Notes When Using Red Hat Enterprise Linux AS4/ES4, or

Oracle Enterprise Linux 4

Note the following when your OS is Red Hat Enterprise Linux AS4/ES4, or Oracle

Enterprise Linux 4:

Before you update the kernel package, uninstall HDLM. After you have updated

the kernel package, re-install HDLM.
For details on HDLM installation and uninstallation, see

3.6 Installing HDLM

and

3.23.11 Uninstalling HDLM

SCSI devices corresponding to an HDLM device can be removed dynamically

Содержание Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Dynamic Link Manager

Отзывы:

Похожие инструкции для Dynamic Link Manager

Бренды по названию

Популярные бренды

Hitachi Dynamic Link Manager, Руководство пользователя

Результаты поиска

Содержание Dynamic Link Manager

Отзывы:

Похожие инструкции для Dynamic Link Manager

Бренды по названию

Популярные бренды