Hitachi Dynamic Link Manager Скачать руководство пользователя

Страница: 194 / 746

3. Creating an HDLM Environment

170

Add the shaded line shown in the above figure.

11. Specify the settings required for using LUKS.

Perform this step if your host OS uses LUKS. If HDLM manages a SCSI device

that has been configured to use LUKS, the LUKS settings must be migrated from

the SCSI device to an HDLM device.
For details on setting up LUKS, see

3.8 Settings for LUKS

12. Specify the settings required for using md devices.

If you want to use md devices, create them in a multi-path environment.
For details about the md device settings, see

3.9 Settings for md Devices

13. Specify the settings required for using the volume management software.

If you performed the operations described in

(3) Deactivating the Volume Group

3.6.3 Preparations for an Upgrade Installation or Re-installation of HDLM

perform the following steps to activate the volume group:
If you did not edit the installation information settings file in step 5 so that the host

is restarted:

Go to step 14.

If you edited the installation information settings file in step 5 so that the host is

restarted:

Go to step 15.

If you do not use the volume management software, go to step 16.
For details on other settings for the volume management software, see

3.10 Settings for LVM2

14. Activate the volume group.

In the following example, the logical volume subject to the move belongs to the

vg01

volume group:

# vgchange -ay vg01
vgchange -- volume group "vg01" successfully activated

15. Mount the logical volume that was moved.

In the following example, the logical volume is

/dev/vg01/lvol1

and the

command mounts the volume on

/mnt/lvol1

# mount /dev/vg01/lvol1 /mnt/lvol1

Содержание Dynamic Link Manager











































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Dynamic Link Manager

Отзывы:

Похожие инструкции для Dynamic Link Manager

Бренды по названию

Популярные бренды

Hitachi Dynamic Link Manager, Руководство пользователя

Результаты поиска

Содержание Dynamic Link Manager

Отзывы:

Похожие инструкции для Dynamic Link Manager

Бренды по названию

Популярные бренды