K6610007
Rev.5
02.14.’03
- 94 -
Table 6.19 Device Configuration Set Command Data Structure (Continued)
Word Description
7
Command Set / Feature Set Supported
bit 15 - 9 0 = Reserved
bit 8
1= 48-bit Addressing feature set supported
Bit 8 is cleared to select no support for 48-bit Addressing feature set (DK23F
series does not support 48-bit Addressing feature).
bit 7
1 = Host Protected Area feature set supported
Bit 7 is cleared to select no support for the Host Protected Area feature set. If
a host protected area has been established by use of the SET MAX ADDRESS
command, this these bits shall not be cleared and the device shall return
command aborted.
bit 6
1 = Automatic acoustic management supported
Bit 6 is cleared to select no support for the Automatic Acoustic Management
feature set.(DK23F series does not support Automatic Acoustic Management
feature).
bit 5
1 = R/W DMA QUEUED commands supported
Bit 5 is cleared to select no support for the READ DMA QUEUED and WRITE
DMA QUEUED commands (DK23F series does not supported R/W DMA
QUEUED commands).
bit 4
1 = Power-up in Standby feature set supported
Bit 4 is cleared to select no support for the Power-up in Standby feature
set.(DK23F series does not support Power-Up in Standby feature).
bit 3
1 = Security feature set supported
Bit 3 is cleared to select no support for the Security feature set This These bits
shall not be cleared if the Security feature set has been enabled.
bit 2
1 = SMART error log supported
Bit 2 is cleared to select no support for the SMART error logging
bit 1
1 = SMART self-test supported
Bit 1 is cleared to select no support for the SMART self-test
bit 0
1 = SMART feature set supported
Bit 0 is cleared to select no support for the SMART feature set If bits 1 and 2
of word 7 are not cleared to zero or if the SMART feature set has been enabled
by use of the SMART ENABLE OPERATIONS command, these bits shall not
be cleared and the device returns command aborted.
8 - 254 Reserved
