Hitachi DDS 32, Руководство по началу работы

Страница: 40 / 62

A-6 Safety Information
Using Power Cords
To prevent the risk of electric shocks and personal injury, fire, and printer
damage:
■
Always use the power cord provided with your printer. When an
extension power cord is required, always use a properly rated cord.
If the power cord is not provided, use the following types of power
cords:
❒
For 100-127V AC circuits:
3 wires, Type SJT 3x16 AWG (3x1.33 mm
2
)
Rated 125V/13A (with grounding plug).
❒
For 230V AC circuits:
3 wires, 3x1.00 mm
2
Harmonized (<HAR>), Rated 300V/10A (with grounding plug).
■
Do not attempt to rework, pull, bend, chafe, or otherwise damage the
power cord. Do not place a heavy object on the cord.
■
Never touch a power cord with wet hands.
■
If your printer produces smoke, excessive heat, unusual noises or
odors, or if any liquid is spilled into the printer, immediately switch
off and unplug the printer.
■
The printer must be connected to the grounding power outlet for safe
and proper operation.
■
The green wire in the power cord must be connected to one of the fol-
lowing conductors:
❒
Ground terminal of the power outlet.
❒
Ground terminal with Class 3 grounding (Japan only).
■
Never connect the ground wire to any of the following:
❒
Gas pipe, which can cause an explosion.
❒
Telephone line ground wire or lightning rod, which can draw an
excessive electric current if hit by lightning.
❒
Water faucet or pipe whose electrical conductivity is broken by a
non-metal part.