-5-
• Connecting the wiring for Asia
Bend at the terminal joints.
Micro Switch
[34]
Put the two brown internal wires
of the Stator
[23]
in the groove.
Put the two blue internal wires of
the Stator
[23]
in the groove.
Put the blue internal wire of the Stator
[23]
in the groove.
Slide Bar
[29]
Slide Knob
[26]
Tab
Tail cover (A)
Controller
[35]
Put the Cord
[44]
through the Cord Armor
[37]
.
Micro Switch
[34]
Internal Wire
[41]
Put the red internal wire in the groove.
Put the black internal wire in the groove.
Put the blue internal wire in the groove.
Controller
[35]
Bend.
After soldering, wrap the soldered
portions with heat-shrinkable tubes.
