-4-
Tail cover (A)
Tab
Slide Knob
[26]
Slide Bar
[29]
Bend at the
terminal joints.
Put the black tube of the Stator
[23]
in the groove.
• Connecting the wiring for UK (110 V), Taiwan, and UAE (110 V)
Put the Cord
[44]
through the Cord Armor
[37]
.
Noise Suppressor
[40]
Crimp the Earth Terminal
[43]
.
Micro Switch
[34]
Internal Wire
[41]
Put the black tube of the Stator
[23]
and brown internal wire in the groove.
Put the black tube and blue internal wire of
the Stator
[23]
, and white internal wire of the
Noise Suppressor
[40]
in the groove.
Insert the Earth Terminal
[43]
into the Housing
[27]
.
Earth Terminal
[43]
Bend.
Cord Clip
[38]
Micro Switch
[34]
Controller
[35]
Noise Suppressor
[40]
After soldering, wrap the soldered
portions with heat-shrinkable tubes.
Controller
[35]
Put red internal wire in the groove.
Put the black internal wire in the groove.
Put the white internal wire in the groove.
Direction of the Cord Clip
[38]
Outside dia. of the cord:
8.5 mm or less
Outside dia. of the cord:
more than 8.5 mm
