Hitachi CP-X265 Скачать руководство пользователя

Страница: 55 / 66

If the air filter becomes clogged by dust or the like, internal temperatures rise and

could cause a fire, a burn and/or malfunction to the projector. When the indicators

or a message prompts you to clean the air filter, clean the air filter as soon as

possible.

Please check and clean the air filter periodically, even if there is no message.

Please replace the air filter when it is damaged or too soiled. Preparation of a new

air filter is recommended.

To prepare a new air filter, contact your dealer and tell the air filter type number.

Type number = NJ22222

And also when you replace the lamp, please replace the air filter. An air filter of

specified type will come together with a replacement lamp for this projector.

Turn the projector off, and unplug the

power cord. Allow the lamp to cool for at

least 45 minutes.

When the projector is suspended from

the ceiling, apply the vacuum cleaner to

and around the filter cover first, to prevent

penetration of dust or the like.

While supporting the projector with one

hand, use your other hand to pull the filter

cover forward in the direction of the arrow.

Remove the air filter.

Maintenance

WARNING

►

Before caring, make sure the power switch is off and the

power cable is not plugged in, then allow the projector to cool sufficiently. The

care in a high temperature state of the projector could cause an electric shock,

a burn and/or malfunction to the projector.

►Use only the air filter of the specified type. Do not use the projector with the

air filter and the filter cover removed. It could result in a fire and/or malfunction

to the projector.

►The air filter should be cleaned periodically. If the air filter becomes clogged

by dust or the like, internal temperatures rise and could cause a fire, a burn

and/or malfunction to the projector.

Air filter

Handle

Filter cover

NOTE

• Please replace the air filter when it is damaged or too soiled, and

also when you replace the lamp.

• Please reset the filter time only when you have cleaned or replaced the air

filter, for a suitable indication about the air filter.

(



)

• The projector may display the message such as “CHECK THE AIR FLOW” or

turn off the projector, to prevent the internal heat level rising.

Содержание CP-X265



































































Результаты поиска

Содержание CP-X265

Отзывы:

Похожие инструкции для CP-X265

Бренды по названию

Популярные бренды

Hitachi CP-X265, Руководство пользователя – Инструкция по эксплуатации

Результаты поиска

Содержание CP-X265

Отзывы:

Похожие инструкции для CP-X265

Бренды по названию

Популярные бренды