4
Item
Description
AUTO OFF
Using the buttons ▲/▼ adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes)
ó
Short (min. 0 minute = DISABLE)
AUTO OFF
ENABLE
AUTO OFF
DISABLE
0
When the time is set to 0, the projector is not turned off automatically.
When the time is set to to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
If one of the projector's buttons or the remote control buttons
is pressed or one of the commands (except get commands) is
transmitted from the control port during the corresponding time,
projector will not be turned off.
Please refer to the section “Turning off the power”
(
17
).
LAMP TIME
The lamp time is the time counted after the last resetting. It is
shown in the OPTION menu as the usage time of the lamp.
Pressing the RESET button on the remote control or the button ►
of the projector displays a dialog. To reset the lamp time, select the
RESET using the button ▲.
RESET
CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section "Lamp" (
53, 54
).
FILTER TIME
The filter time is the time counted after the last resetting. It is shown
in the OPTION menu as the usage time of the air filter.
Pressing the RESET button on the remote control or the button ► of the
projector displays a dialog. To reset the filter time, select the RESET using
the button ▲.
RESET
CANCEL
•
Please reset the filter time only when you have cleaned or replaced
the air filter, for a suitable indication about the air filter.
•
For the air filter cleaning, see the section "Air filter"
(
55, 56
).
MY BUTTON
Sets the assigned function for the MY BUTTON and buttons on
the included remote control.
• RGB: Sets port to RGB.
• RGB: Sets port to RGB.
• COMPONENT: Sets port to COMPONENT.
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• e-SHOT: Displays the e-SHOT menu (
51
).
• INFORMATION: Displays INPUT INFORMATION (
43
).
• AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE
correction (
35
).
• MY MEMORY: Loads MY MEMORY settings (
29
).
• PICTURE MODE: Changes the PICTURE mode (
25
).
•
FILTER RESET: Displays the filter time reset confirmation dialogue
(
41
).
• : Sets the volume up.
• VOLUME-: Sets the volume down.
OPTION Menu
OPTION Menu (continued)
