Hitachi CP-X265 Скачать руководство пользователя

Страница: 48 / 66

Item

Description

SECURITY

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started to

supply to the projector, it might react as below.

• Transition Detector alarm shown below might appear on screen, if the

projector has been moved or re-installed.

• Transition Detector alarm might appear on screen, if the MIRROR setting

has been changed.

• Keystone adjustment feature has been prohibited as long as the Transition

Detector function is ON.

4.1 Turning On the

Transition Detector

Function

4.1-1

Use the ▲/▼ buttons on the SECURITY menu to

select Transition Detector and press the ► or the

ENTER button to display the Transition Detector

on/off menu. Select TURN ON and the current

angle and mirror setting will be recorded.

NOTE: This feature may not function properly if the projector

is not in a stable position when TURN ON is selected.
4.1-2 If this function is set to TURN ON when the

vertical angle of the projector or mirror setting

at which the projector is turned on is different

than the previously recorded the Transition

Detector Alarm will be displayed and the

projector will not display the input signal.

Set the Transition Detector off in the SECURITY menu or set the projector at the

recorded angle to display the input signal.

If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off.

This function will activate only when the projector is started after the power

switch was turned off.

4.2 Setting the

Transition Detector

PASSWORD

4.2-1

Use the ▲/▼ buttons on the SECURITY menu to select

Transition

Detector

and press the ► or the ENTER button to display the

Transition

Detector

on/off menu.

4.2-2

Use the ▲/▼ buttons on the Transition Detector

on/off menu to select TURN ON. The ENTER

PASSWORD BOX (small) will be displayed.

4.2-3

Use the ▲/▼/◄/► buttons to enter a PASSWORD.

Move the cursor to the right side of the ENTER

PASSWORD BOX (small) and press the ► button

to display the CHECK PASSWORD BOX, enter the

same PASSWORD again.

4.2-4

Move the cursor to the right side of the CHECK

PASSWORD BOX and press the ► button to

display the PASSWORD for about 20 seconds,

please make note of the PASSWORD during

this time. After the PASSWORD has displayed

for about 20 seconds the screen will return to

the Transition Detector on/off menu.

Pressing the ENTER button on the remote controll or the

INPUT button on the projector will close the PASSWORD BOX.

NOTE

: Please do not forget your Transition Detector PASSWORD.

OPTION Menu (continued)

OPTION Menu

6TCPUKVKQP&GVGEVQT

674010

67401((

Transition Detector

on/off menu

Transition Detector Alarm

2+0$1:

64#05+6+10&'6'%61410

6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF

HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP

+H[QWYKUJVQJCXGCUSWCTGKOCIG

QPUETGGPCICKP

FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW

6TCPUKVKQP&GVGEVQT

'06'42#55914&

0':6

37+6

ENTER PASSWORD

BOX (small)

6TCPUKVKQP&GVGEVQT

%*'%-2#55914&

0':6

37+6

CHECK PASSWORD

BOX

6TCPUKVKQP&GVGEVQT

%1/2.'6'

':+6

'06'4

PASSWORD BOX

Содержание CP-X265



































































Результаты поиска

Содержание CP-X265

Отзывы:

Похожие инструкции для CP-X265

Бренды по названию

Популярные бренды

Hitachi CP-X265, Руководство пользователя – Инструкция по эксплуатации

Результаты поиска

Содержание CP-X265

Отзывы:

Похожие инструкции для CP-X265

Бренды по названию

Популярные бренды