3
HSK2411202016 | Dynamic Terminal Ku 8X8 V2 | Quick Start Installation Guide
The terminal kit contains the following items: IoT Dynamic Ku 8X8 V2 Terminal, and this
Quick Start Guide
. The kit
does not include a bracket, screws, cables, or any other mechanical parts for the installation.
Power Supply
Obtain the power cable
from your supplier. Refer to the information in the “Power and Data
Cable” section of this document for information about the power and data cable pinouts.
Only power up the system with one of the following options:
• AC to DC power supply
- 12-24V, 48W DC jack 2.5X5.5MM.
• DC to AC inverter connected from the vehicle to AC to DC power supply.
• DC cable connected from a vehicle directly to the system 12V DC jack 2.5X5.5MM
WARNING: Both the power supply and the inverter must be certified for safety, electromagnetic
compatibility, and all the regulations in the region where the terminal will operate.
Follow all safety instructions according to the manufacturer of the power supply and inverter.
A qualified technician should examine the risk of electrical shock and energy hazard of power supply and
inverter failures according to manufacturer instructions.
Part
Description
Status LED
Off: Powered off
Slow Flashing green: Searching for satellite (terminal
initialization or tracking lost ).
Fast Flashing green: registration process
Solid Green: Service available (terminal locked/track and
registered).
Flashing Blue (every burst): Terminal transmit (toggle every half-
second for 250 mil).
Flashing red: No service due to registration problem
Red: Power up / Failure
Solid Blue: Recovery Mode
Connector
Circular connector 19 pin:
DC, Ethernet, Serial
–
232/485, Wake up I/O
