background image

INSTALLATION ROOM

The room where the gas appliance is to be installer must have a natural flow of air so that the 
gas can burn. The flow of air must come directly from one or more openings made in the

out-side  walls  with  a  free  area  of  at  least  100c

.  If  the  appliance  does  not  have  a  no-flame 

safety device this opening must have an area of at least 200c

. The openings should be near 

the floor and preferably on the side opposite the exhaust for combustion products and must be 
so  made  that  they  cannot  be  blocked  from  either  the  outside  or  the  outside.  When  these 
openings  cannot  be  made  the  necessary  air  can  come  from  an  adjacent  room  which  is 
ventilated  as  required,  as  long  as  it  is  not  a  bedroom  or  a  dangerous  area.  In  this  case  the 
kitchen door must allow the passage of the air. 

DISCHARGING PRODUCTS OF COMBUSTION

Extractor  hoods  connected  directly  to  the  outside  must  be  provided,  to  allow  the  products  of 
combustion of the gas appliance to be discharged (fig.9). If this is not possible, an electric fan 
may be used, attached to the external wall or the window; the fan should have a capacity to 
circulate air at an hourly rate of 3-5 times the total volume of the kitchen (fig.10). The fan can 
only  be  installed  if  the  room  has  suitable  vents  to  allow  air  to  enter,  as  described  under  the 
heading “Installation room”.

SETTLING THE BUILT-IN GAS HOB FOR INSTALLATION

Every cooker top is provided with a set of tabs for fitting to the unit with thickness from 3 to 4 cm 
and a seal with adhesive on one side.

-Remove burners and grids.

-Turn the cooker top over and rest the glass side on a cloth.

-Apply the self-adhesive seal “G” as illustrated in fig.11.

 

7

Содержание HHU60GASS


















Отзывы: