Hisense HHU60GASS, Руководство пользователя

Страница: 8 / 17

●
In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown on
the cutting size board has to be made, keeping in consideration the following:
Within the fixture, between the bottom side of the cooker top and the upper surface of any
other appliance or internal shelf there
must be a clearance of at least 30 mm;
The cooker top must be kept no less than 100 mm away from any side wall;
The hob must be installed at least 50 mm from the wall.
There must be a distance of at least 650 mm between the hob and any wall cupboard or
extractor hood positioned immediately
above.
It is essential to install a heat baffle between the bottom of the hob and the underlying unit.
●
●
●
●
INSTALLATION IN KITCHEN CABINET WITH DOOR (fig.8)
The fixture has to be made according to specific requirements in order to prevent the gas
burners from going out, even when the flame is turned down to minimum, due to pressure
changes while opening or closing the cupboard doors. It is recommended that a 30 mm
clearance be left between the cooker top and the fixture surface (fig.8).
6