Hirschmann RSPE 30, Руководство пользователя

Страница: 35 / 68

Installation RSPE 30/32/35/37
Release 12 10/2015
35
2 Installation
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
Perform the following steps to install and configure the device:
 Checking the package contents

Installing the SD card (optional)
 Mounting a dummy panel or a media module
 Installing and grounding the device

Installing an SFP transceiver (optional)
 Connecting the terminal blocks

Operating the device
 Connecting data cables
 Filling out the inscription label
2.1 Checking the package contents
Proceed as follows:

Check whether the package includes all items named in the section
“Scope of delivery” on page 62 .

Check the individual parts for transport damage.
2.2 Installing the SD card (optional)
Note: Only use the AutoConfiguration Adapter ACA31 storage medium.
See “Accessories” on page 63.
Proceed as follows:

Deactivate the write protection on the SD card by pushing the write-
protect lock towards the middle of the card.

Push the SD card into the slot with the beveled corner facing upwards.

Tighten the thumb screw hand-tight to fix the SD card.