Hirschmann RSPE 30, Руководство пользователя

Страница: 12 / 68

12
Installation RSPE 30/32/35/37
Release 12 10/2015

IECEx – Certification Scheme for Explosive Atmospheres
For RSPE devices labeled with an IECEx certificate number, the following
applies:

List of standards:
IEC 60079-0:2011+Cor.2012+Cor.2013
IEC 60079-15:2010

The device is suitable for use in an area with a degree of soiling of 2
as per IEC 60664-1.

Make sure that the device has the following label:
Ex nA IIC T4 Gc IECEx DEK 15.0013X
for RSPE types
Environmental class and temperature code for RSPE types:
T4: 0 °C ≤ Ta ≤ +60 °C for “S“ types or
T4: − 40 °C ≤ Ta ≤ +70 °C for “T“ or “E“ types

The modules shall be installed in a suitable enclosure in accordance
with IEC 60079-15 providing a degree of protection of at least IP54
according to IEC 60529, taking into account the environmental
conditions under which the equipment will be used.

When the temperature under rated conditions exceeds 70 °C at the
cable or conduit entry point, or 80 °C at the branching point of the
conductors, the temperature specification of the selected cable and
cable entries shall be in compliance with the actual measured
temperature values.

Provisions shall be made to prevent the rated voltage from being
exceeded by transient disturbances of more than 119 V.

Connectors shall be connected or disconnected exclusively in dead-
voltage state.

The USB port shall remain disconnected.

CE marking
The labeled devices comply with the regulations contained in the
following European directive(s):